manualshive.com logo in svg

Ditch Witch JT5, Руководство оператора

Поделиться
Скачать
Ditch Witch JT5 Скачать руководство пользователя страница 13

Safety - 12

JT5 Operator’s Manual

Guidelines

CMW

®

Guidelines

Follow these guidelines before operating any jobsite equipment:

•

Complete proper training and read operator’s manual before using equipment.

•

Contact your local One-Call (811 in USA) or the One-Call referral number (888-258-0808 in USA and 
Canada) to have underground utilities located before digging. Also contact any utilities that do not 
participate in the One-Call service. Mark proposed path with white paint prior to contacting One-Call or 
utilities.

•

Classify jobsite based on its hazards and use correct tools and machinery, safety equipment, and work 
methods for jobsite.

•

Mark jobsite clearly and keep spectators away.

•

Wear personal protective equipment.

•

Review jobsite hazards, safety and emergency procedures, and individual responsibilities with all 

personnel before work begins. Safety videos are available from your Ditch Witch

®

 dealer or at 

ditchwitch.com/resources/safety.

•

Replace missing or damaged safety shields and safety signs.

•

Use equipment carefully. Stop operation and investigate anything that does not look or feel right.

•

Do not operate unit where flammable gas may be present.

•

Contact your Ditch Witch dealer if you have any question about operation, maintenance, or equipment 
use.

•

Complete the equipment checklist located at www.ditchwitch.com/resources/safety.

Содержание JT5




























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды