manualshive.com logo in svg

Ditch Witch JT5, Руководство оператора

Поделиться
Скачать
Ditch Witch JT5 Скачать руководство пользователя страница 101

Systems and Equipment - 100

JT5 Operator’s Manual

Drilling Fluid

CMW

®

Funnel Viscosity

Viscosity is the measure of internal resistance of a fluid to flow; the greater the resistance, the higher the 
viscosity. Viscosity of drilling fluids must be controlled.

To determine viscosity, you will need a Marsh funnel (p/n 259-267) and a measuring cup, available from 

your Ditch Witch

®

 dealer.

1.

Using wash hose and a clean container, take a fresh 
sample of drilling fluid. The sample must be at least 
1.5 qt (1.4 L).

2.

With finger over bottom of funnel, fill with fluid from 
the container through the screen until fluid reaches 
the bottom of the screen.

3.

Move funnel over 1 qt (.95 L) container.

4.

Remove finger from bottom of funnel and use the 
stopwatch to count the number of seconds it takes for 
1 qt (.95 L) of fluid to pass through the funnel. The 
number of seconds is the viscosity.

5.

Thoroughly rinse measuring cup and Marsh funnel.

IMPORTANT: 

Make sure Marsh funnel is clean and free of obstruction and that you have a stopwatch 

available for timing the viscosity.

Содержание JT5




























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды