Digi IX14, Руководство пользователя

Страница: 95 / 828

Interfaces Wireless Wide Area Networks (WWANs)
IX14 User Guide 95
n
auto : Requests both IPv4 and IPv6 address.
n
ipv4 : Requests only an IPv4 address.
n
ipv6 : Requests only an IPv6 address.
The default is auto .
6. (Optional) Set the authentication method:
(config)> network interface modem modem apn 0 auth method
(config)>
where method is one of the following:
n
none : No authentication is required.
n
auto : The device will attempt to connect using CHAP first, and then PAP.
n
chap : Uses the Challenge Handshake Authentication Profile (CHAP) to authenticate.
n
pap : Uses the Password Authentication Profile (PAP) to authenticate.
If auto , chap , or pap is selected, enter the Username and Password required to authenticate:
(config)> network interface modem modem apn 0 username name
(config)> network interface modem modem apn 0 password pwd
(config)>
The default is none .
7. (Optional) To configure the device to bypass its preconfigured APN list and only use the
configured APNs:
(config)> network interface modem modem apn_lock true
(config)>
8. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
9. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu . Type quit to disconnect from the device.
Show cellular status and statistics
You can view a summary status for all cellular modems, or view detailed status and statistics for a
specific modem.

WebUI
1. Log into the IX14 WebUI as a user with Admin access.
2. On the menu, click Status .
3. Under Connections , click Modems .
The modem status window is displayed

Command line