Digi IX14, Руководство пользователя

Страница: 393 / 828

Services Modbus gateway
IX14 User Guide 393
n
To limit access to specified IPv6 addresses and networks:
a. Click IPv6 Addresses .
b. For Add Address , click

.
c. For Address , enter the IPv6 address or network that can access the device's web
administration service. Allowed values are:
l
A single IP address or host name.
l
A network designation in CIDR notation, for example, 2001:db8::/48.
l
any : No limit to IPv6 addresses that can access the web administration service.
d. Click

again to list additional IP addresses or networks.
n
To limit access to hosts connected through a specified interface on the IX14 device:
a. Click Interfaces .
b. For Add Interface , click

.
c. For Interface , select the appropriate interface from the dropdown.
d. Click

again to allow access through additional interfaces.
n
To limit access based on firewall zones:
a. Click Zones .
b. For Add Zone , click

.
c. For Zone , select the appropriate firewall zone from the dropdown.
See Firewall configuration for information about firewall zones.
d. Click

again to allow access through additional firewall zones.
10. Repeat these steps to configure additional servers.
Configure clients
1. Click to expand Clients .
2. For Add Modbus client , type a name for the client and click

.
The new Modbus gateway client configuration is displayed.