Digi IX14, Руководство пользователя

Страница: 269 / 828

Firewall Configure Quality of Service options
IX14 User Guide 269
g. If Default is disabled, you must configure at least one rule:
i. Click to expand Rule .
ii. For Add Rule , click

.
The QoS binding policy rule configuration window is displayed.
New QoS binding policy rules are enabled by default. To disable, click Enable .
iii. (Optional) Type a Label for the binding policy rule.
iv. For Type Of Service , type the value of the Type of Service (ToS) packet header that
defines packet priority. If unspecified, this field is ignored.
See https://www.tucny.com/Home/dscp-tos for a list of common TOS values.
v. For Protocol , select the IP protocol matching criteria for this rule.
vi. For Source port , type the port, or any , as a source traffic matching criteria.
vii. For Destination port , type the port, or any , as a destination traffic matching criteria.
viii. Click to expand Source address and select the Type :
n
Any : Source traffic from any address will be matched.
n
Interface : Only traffic from the selected Interface will be matched.
n
IPv4 address : Only traffic from the IP address typed in IPv4 address will be
matched. Use the format IPv4_address [ / netmask ] , or use any to match any
IPv4 address.
n IPv6 address : Only traffic from the IP address typed in IPv6 address will be
matched. Use the format IPv6_address [/ prefix_length ] , or use any to match
any IPv6 address.
n
MAC address : Only traffic from the MAC address typed in MAC address will be
matched.
ix. Click to expand Destination address and select the Type :
n
Any : Traffic destined for anywhere will be matched.
n
Interface : Only traffic destined for the selected Interface will be matched.
n
IPv4 address : Only traffic destined for the IP address typed in IPv4 address
will be matched. Use the format IPv4_address [ / netmask ] , or use any to match
any IPv4 address.