Digi IX14, Руководство пользователя

Страница: 375 / 828

Services Location information
IX14 User Guide 375
Allowed values are:
l
al : Reports altitude and vertical velocity.
l
cp : Compact position: reports time, latitude, and longitude.
l
id : Reports the vehicle ID.
l
ln : Long navigation: reports the latitude, longitude, and altitude, the horizontal and
vertical speed, and heading.
l
pv : Position/velocity: reports the latitude, longitude, and heading.
To remove a message type:
a. Use the show command to determine the index number of the message type to be
deleted:
(config service location forward 0)> show filter_taip
0 al
1 cp
2 id
3 ln
4 pv
(config service location forward 0)>
b. Use the index number to delete the message type. For example, to delete the id
(index number 2) message type:
(config service location forward 0)> del filter_taip 2
(config service location forward 0)>
To add a message type:
a. Change to the filter_taip node:
(config service location forward 0)> filter_taip
(config service location forward 0 filter_taip)>
b. Use the add command to add the message type. For example, to add the id
message type:
(config service location forward 0 filter_taip)> add id end
(config service location forward 0 filter_taip)>
13. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
14. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu . Type quit to disconnect from the device.
Configure geofencing
Geofencing is a mechanism to create a virtual perimeter that allows you configure your IX14 device to
perform actions when entering or exiting the perimeter. For example, you can configure a device to