Digi IX14 Скачать руководство пользователя

Страница: 349 / 828

Services

Configure DNS

IX14 User Guide

349

To limit access to hosts connected through a specified interface on the IX14 device:

a. Click

Interfaces

b. For

Add Interface

, click



c. For

Interface

, select the appropriate interface from the dropdown.

d. Click



again to allow access through additional interfaces.

To limit access based on firewall zones:

a. Click

Zones

b. For

Add Zone

, click



c. For

Zone

, select the appropriate firewall zone from the dropdown.

See

Firewall configuration

for information about firewall zones.

d. Click



again to allow access through additional firewall zones.

5. (Optional)

Cache negative responses

is enabled by default. Disabling this option may improve

performance on networks with transient DNS results, when one or more DNS servers may have
positive results. To disable, click

Cache negative responses

6. (Optional)

Query all servers

is enabled by default. This option is useful when only some DNS

servers will be able to resolve hostnames. To disable, click

Query all servers

7. (Optional)

Rebind protection

, if enabled, prevents upstream DNS servers from returning

private IP addresses. To enable, click

Rebind protection

8. (Optional)

Allow localhost rebinding

is enabled by default if

Rebind protection

is enabled.

This is useful for Real-time Black List (RBL) servers.

9. (Optional) To add additional DNS servers:

a. Click

DNS servers

b. For

Add Server

, click



c. (Optional) Enter a label for the DNS server.

d. For

DNS server

, enter the IP address of the DNS server.

Domain

restricts the device's use of this DNS server based on the domain. If no domain

are listed, then all queries may be sent to this server.

10. (Optional) To add host names and their IP addresses that the device's DNS server will resolve:

a. Click

Additional DNS hostnames

b. For

Add Host

, click



c. Type the

IP address

of the host.

d. For

Name

, type the hostname.

11. Click

Apply

to save the configuration and apply the change.



Command line

Содержание IX14





























































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание IX14

Отзывы:

Похожие инструкции для IX14

Бренды по названию

Популярные бренды

Digi IX14, Руководство пользователя

Результаты поиска

Содержание IX14

Отзывы:

Похожие инструкции для IX14

Бренды по названию

Популярные бренды