Digi IX14, Руководство пользователя

Страница: 274 / 828

Firewall Configure Quality of Service options
IX14 User Guide 274
(config network qos 2 policy 0 rule 0)> src address value
(config network qos 2 policy 0 rule 0)>
where value uses the format IPv4_address [ / netmask ] , or any to match any
IPv4 address.
n
address6 : Only traffic from the IP address typed in IPv6 address will be
matched. Set the address that will be matched:
(config network qos 2 policy 0 rule 0)> src address6 value
(config network qos 2 policy 0 rule 0)>
where value uses the format IPv6_address [ / prefix_length ] , or any to match
any IPv6 address.
n
mac : Only traffic from the MAC address typed in MAC address will be matched.
Set the MAC address to be matched:
(config network qos 2 policy 0 rule 0)> src mac MAC_address
(config network qos 2 policy 0 rule 0)>
ix. Set the destination address type:
(config network qos 2 policy 0 rule 0)> dst type value
(config network qos 2 policy 0 rule 0)>
where value is one of:
n
any : Traffic destined for anywhere will be matched.
See Firewall configuration for more information about firewall zones.
n
interface : Only traffic destined for the selected Interface will be matched. Set
the interface:
i. Use the ? to determine available interfaces:
(config network qos 2 policy 0 rule 0)> dst interface ?
Interface: Match the IP address with the specified
interface's network address.
Format:
/network/interface/defaultip
/network/interface/defaultlinklocal
/network/interface/lan
/network/interface/loopback
/network/interface/modem
Current value:
(config network qos 2 policy 0 rule 0)> dst interface
ii. Set the interface. For example: