DHS Systems 1003080, Техническое руководство

Страница: 21 / 136

Operation & Maintenance Medium SXGA+ Projection System 0001
Part Number 1006380 0001-7 DHS Systems LLC
This document contains information proprietary to DHS Systems LLC and is intended solely for use by its customers. No portion of this document may be reproduced
for release to a third party without written consent of DHS Systems LLC.
QUALITY OF MATERIAL
Material used for replacement, repair, or modification must meet requirements of this Operator and Unit Maintenance
Manual. If quality of material requirements is not stated in this Operator and Unit Maintenance Manual, material must
meet the requirements of drawings, standards, specifications, or approved engineering change proposals applicable
to subject equipment.
SAFETY, CARE, AND HANDLING
To prevent personal injury and damage to equipment, obey the following general rules and precautions:
1. Become familiar with warnings and cautions listed in front of this manual.
a. Warnings – Present circumstances or procedures which, if not strictly adhered to, may cause injury or
death.
b. Cautions – Present circumstances which can cause damage to equipment or loss of mission.
2. Recognize equipment may require at least a two-person carry. Follow number of lifter/requirements in safety
marking (labels or stencils) and caution statements in Technical Documentation. No rights are conveyed except as
indicated in the legend on the cover of this document.
3. Ensure all power is turned off before starting any removal task.
4. Do not touch connector terminals with any tool, bare hands, or dirty cloth. Tools damage the connector. Dirt or
sweat will cause corrosion.
5. Before touching any electrical component, discharge static electricity by touching a metal chassis or cabinet.. A
static discharge to an electrical component can destroy internal circuits.
6. Know where emergency equipment is located. Read instructions on fire extinguisher label.
7. Ensure hands are clean before working on equipment.
NUCLEAR HARDNESS
There are no Hardness Critical Procedures (HCP) in this manual.
CALIBRATION
All equipment requiring calibration shall be done in accordance with TB 43-180.
GROUNDING
Refer to CECOM TR-98-6 for proper grounding instructions.
END OF WORK PACKAGE