DHS Systems 1003080, Техническое руководство

Страница: 83 / 136

Operation & Maintenance Medium SXGA+ Projection System 0008
Part Number 1006380 0008-15 DHS Systems LLC
This document contains information proprietary to DHS Systems LLC and is intended solely for use by its customers. No portion of this document may be reproduced
for release to a third party without written consent of DHS Systems LLC.
PIN code
The projector can be secured and
locked with a 4-digit PIN (Personal
Identification Number) code, similarly
to mobile phones and other electronic
equipment. To enable PIN code
protection, a valid, four-digit code must
be entered. Press “OK” to select the
code, enter new PIN code via the
numeric pad on the keypad or remote
control. Please note that entered
numbers are masked. To disable PIN
code, or change it, follow the same
procedure as above.
When PIN code is enabled, the user is
prompted to enter the code when
powering up the projector. The user
has three attempts. See PIN code
security on page 30 - 31 for more
information.
Network
The projector features a built-in
network connector for asset
management and control over IP. The
network menu allows enabling DHCP
in order to automatically be assigned
an IP when connected, or setting a
static IP address, subnet mask, and
default gateway.
Highlight the setting to be changed,
press “OK”, and change the values
with the up / down arrow keys. Move
between values with the left / right
arrow keys.