DHS Systems 1003080, Техническое руководство

Страница: 80 / 136

Operation & Maintenance Medium SXGA+ Projection System 0008
Part Number 1006380 0008-12 DHS Systems LLC
This document contains information proprietary to DHS Systems LLC and is intended solely for use by its customers. No portion of this document may be reproduced
for release to a third party without written consent of DHS Systems LLC.
Wide Setup
Wide setup gives manual control to correctly
displaying source that are wide aspect ratio
of standard resolutions, such as 1600x1050
(SXGA+), 1280x768 (WXGA), and similar.
OSD enable
Enables or disables the OSD (On Screen
Display) dialogues. Possible settings include
“on”, “off”, or “only warnings”. The latter will
display system warnings, such as
overheating, lamp life expiry, other critical
information. “off” disables all warnings and
messages. OSD enable is set to “on” by
default.
Test image
Displays a test image frame that is easy to
use when setting up and determining screen
size, and position. Options include “4:3”,
“16:9”, “1.85:1”, “2.35:1”, and a combination
of all of the above.
Sync termination VGA
Enable if experiencing unstable images
using long cables to improves picture
quality.
Sync termination DVI-A
Select between manual or auto
detection of TV standard.
Vertical keystone
Vertical keystone correction
electronically compensates for the
trapezoidal image created when the
projector is tilted, and is no longer
perpendicular to the wall or screen
surface. Instead of electronic keystone
correction, it is advised that optical lens
shift is used, if possible.
NOTE: THIS FUNCTION DOES NOT
APPLY FOR WUXGA PRODUCTS.
Sync level VGA/BNC
Manually changes the level of sync