DHS Systems 1003080, Техническое руководство

Страница: 81 / 136

Operation & Maintenance Medium SXGA+ Projection System 0008
Part Number 1006380 0008-13 DHS Systems LLC
This document contains information proprietary to DHS Systems LLC and is intended solely for use by its customers. No portion of this document may be reproduced
for release to a third party without written consent of DHS Systems LLC.
that is needed for the projector to
accept it.
Warning! If set too low, the image will
disappear!
Sync level RGB Video
Manually changes the level of sync
that is needed for the projector to
accept it.
Warning! If set too low, the image will
disappear!
Lamp
Enters the lamp management sub
menu. See below.
Trigger
Enters trigger sub menu where you
can select aspect trigger mode and
screen trigger mode. The alternatives
are auto, on or off.
Auto: Aspect trigger: follows aspect
ratio settings (4:3 or 16:9).
Screen trigger: on when projector is
on, off when projector is off.
On: Always on (12V)
Off: Always off (0V)
If RS232 control is used, this overrides
the trigger settings.
LAMP SUB MENU
Eco mode
Switch eco mode (low power and long
life) on or off. When on, lamp power
may not be adjusted. When off, lamp
power may be adjusted.
Lamp power
Adjust lamp power when not in eco
mode.
Estimated remaining
The estimated remaining lamp life at
the current lamp power.