DHS Systems 1003080, Техническое руководство

Страница: 113 / 136

Operation & Maintenance Medium SXGA+ Projection System 0015
Part Number 1006380 0015-1 DHS Systems LLC
This document contains information proprietary to DHS Systems LLC and is intended solely for use by its customers. No portion of this document may be reproduced
for release to a third party without written consent of DHS Systems LLC.
OPERATOR MAINTENANCE INSTRUCTIONS
MEDIUM SXGA+ PROJECTION SYSTEM
SERVICE – PMCS
INITIAL SETUP:
References
WP 0005, WP 0006, WP 0007
Table 1. Operator Preventive Maintenance Checks and Service
ITEM
NO.
INTERVAL
ITEM TO BE
CHECKED
OR SERVICED
AVCS
PROCEDURE
EQUIPMENT NOT
READY/
AVAILABLE IF:
1
BEFORE
Medium
SXGA+
Projection
System Cases 1. Inspect case for cracks, damaged, loose
or missing hardware. Case interior shows
signs of moisture or
equipment
excessively dirty
2. Inspect case interior for moisture or dirt.
Clean and dry as necessary.
2
BEFORE
Cables and
connectors 1. Check entire length of cable for cuts,
gashes, or physical damage.
2. Check cable connectors for damage. Cables cannot be
attached properly,
pins are missing or
bent, or there is
corrosion or dirt that
cannot be removed.
3. Ensure cable connections are secure.
Tighten if necessary.
PROJECTOR
3 BEFORE Exterior
surface 1. Check exterior for damage, loose
hardware and cleanliness. Damage to exterior
surfaces prevent
controls or
connectors from
functioning
properly.
4
BEFORE
Cables and
connectors 1. Ensure cable connectors are secure.
Tighten if necessary.
2. Check cable connectors for damage
Cables cannot be
attached properly,
pins are missing or
bent, or there is
corrosion or dirt that
cannot be removed.
5
BEFORE
Lens Clean projector lens by wiping with cleaning
cloth that contains a small amount of non-
abrasive camera lens cleaner or with lens
cleaning paper