DHS Systems 1003080, Техническое руководство

Страница: 46 / 136

Operation & Maintenance Medium SXGA+ Projection System 0005
Part Number 1006380 0005-12 DHS Systems LLC
This document contains information proprietary to DHS Systems LLC and is intended solely for use by its customers. No portion of this document may be reproduced
for release to a third party without written consent of DHS Systems LLC.
Projection Screen Folding Instructions
Please follow the following steps outlined below when folding the screen material for packing.
NOTE
Make sure the surface does not come in contact with a painted, varnished, plastic, or dyed
surface or object. Prolonged contact with any one of these material could cause a chemical
reaction and compromise the screen’s physical or optical quality. This can be accomplished
by laying a white clean cotton fabric or paper (slightly larger than the screen size) on a flat
surface prior to folding the screen.
39. With the white surface facing up, fold the screen in half from top to bottom as shown in Figure 14. Make sure the
screen never comes in contact with the black binding, grommets or snap buttons. Please note that for this to
happen, one must make sure all folds subsequent to the first fold stop short of black binding material as illustrated
below.
40. Place clean tissue paper or white 100% cotton material between the folds.
Figure 14. Folding Screen.