DeltaOHM HD31, Руководство по эксплуатации

Страница: 113 / 154

HD31
- 113 -
V1.6
Logging:
Command Response Description
LOGTIME: LOGTIME:nn| Reads the logging interval set in the in-
strument (the value is in seconds).
If nn=0, the manual logging is set.
LOGTIME:nn
(nn = 0, 1, 5, 10, 15,
30, 60, 120, 300, 600,
900, 1200, 1800, 3600)
LOGTIME:nn; ok| Sets the logging interval to nn seconds
value.
If nn=0, the manual logging is set.
LOGOFF: LOGOFF:n| Reads the enabling status of the auto
switch off during logging:
ƒ
disabled if n=0
ƒ
enabled if n=1
LOGOFF:n
(n = 0,1) LOGOFF:n; ok| Enables/disables auto switch off during
logging:
ƒ
disables if n=0
ƒ
enables if n=1
LOG:n
(n = 0,1) LOG:start; ok|
LOG:stop; ok| Starts/stops logging:
ƒ
stops if n=0
ƒ
starts if n=1
If quantities have been selected for logging,
only the quantities selected are stored in
memory, otherwise all the quantities dis-
played by the instrument are stored.
LOGSTART: LOGSTART:yyyy/mm/dd
HH:MM|
Reads the logging programmed start
date/time.
LOGSTART:
yyyy/mm/dd HH:MM LOGSTART:yyyy/mm/dd
HH:MM; ok| Sets the date and the time of logging
programmed start.
LOGSTOP: LOGSTOP:yyyy/mm/dd
HH:MM|
Reads the logging programmed stop
date/time.
LOGSTOP:
yyyy/mm/dd HH:MM LOGSTOP:yyyy/mm/dd
HH:MM; ok| Sets the date and the time of logging
programmed stop.
LOGCLR: LOGCLR:ok| Deletes the settings of the logging
programmed start/stop.
LOGCHN:cc
(cc = 01…36) LOGCHN:cc;n| Indicates whether the measurement with
sequential number cc on the display of the
instrument is selected for logging:
ƒ
not selected if n=0
ƒ
selected if n=1
LOGCHN:cc;n
(cc = 01…36; n=0,1) LOGCHN:cc;n; ok| Selects/deselects the measurement with
sequential number cc on the display of the
instrument for logging:
ƒ
deselects if n=0
ƒ
selects if n=1