DeltaOHM HD31, Руководство по эксплуатации

Страница: 58 / 154

HD31
- 58 -
V1.6
4. Using
S
and
T
, select "ENABLED" to enable the Auto-off or
"DISABLED" to disable it.
Note : the current setting is shown in white, while the other
available setting appears in yellow color to highlight that it is
not the current setting.
5. Select OK ( F3 key) to confirm, or ESC to exit without changing the value.
6. The instrument returns to the SLEEP menu item, press ESC twice to exit the menu and re-
turn to the measuring mode .
7.6 M
ANUAL LOGGING
To perform manual logging, it is first necessary to set "MANUAL" as logging interval (see para-
graph 7.1). To perform manual logging:
1. Press SELECT to display the LOG
command in the command bar,
then select the command by press-
ing the F1 key.
2. Start a logging session by selecting the RUN command ( F1
key).
Note : the RUN command does not acquire a sample, but is
used to indicate that the samples acquired manually after the
command, up to the STOP command, form a logging session.
Note : the RUN command is replaced by the STOP command if
logging is in progress.
Note : the RUN command will not go into effect if the instru-
ment is waiting for a programmed startup of a logging session.
3. The LOG indication, the MANL indication and the logging ses-
sion duration appear in the display status bar.
To manually acquire a sample (consisting of the measurement
lines explicitly selected for logging or all the measurement
lines, if no line was explicitly selected for logging), select the
MANL command ( F3 key).
4. To end the logging session, select the STOP command ( F1
key).
After the stop command, the logging stop message appears:
wait for the completion of the operation.