DeltaOHM HD31, Руководство по эксплуатации

Страница: 50 / 154

HD31
- 50 -
V1.6
5.3 D
ISPLAYING MINIMUM
,
AVERAGE AND MAXIMUM VALUES
To display the minimum, average and maximum values acquired with the RECORD function :
1.
Select the desired measurement line using
S
and
T
.
2. Press SELECT to display the VIEW
command in the command bar, then
select the command by pressing F2 .
Note : the VIEW command is dis-
abled if there are no samples ac-
quired with the RECORD function for
the selected quantity.
3. Select the command:
• MIN ( F1 key) to display the minimum of the acquired values.
• AVRG ( F2 key) to display the average of the acquired values.
• MAX ( F3 key) to display the maximum of the acquired values
4. The indication of the performed selection is shown in the upper
part of the measurement line, next to the number of the acquired
samples.
Minimum, average and maximum values can be displayed also when the RECORD function is
active: values are updated after each acquisition.
To disable the display of the statistical value and return to the current value, press again the
button corresponding to the displayed statistics (e.g., select again MAX with the F3 key if the
maximum value is displayed).
Press
ESC to exit the VIEW menu.
Note : by displaying the same quantity in several measurement lines, both the quantity current
value and the statistic information can be shown.
5.4 R
ESETTING AND DISABLING THE
RECORD
FUNCTION
The acquired values are added to the ones saved in memory.
Delete the already acquired values by selecting the
DEL com-
mand ( F3 key) to start a new calculation session of the mini-
mum, average and maximum values.
Then select the CLR command by pressing the F3 key: the
counter of the acquired samples is zeroed.
To disable the RECORD function, select instead the CANC command by pressing the F1 key.
Press ESC to return to the previous menu level.
Type of statistics