![DeltaOHM HD31 Скачать руководство пользователя страница 9](http://html1.mh-extra.com/html/deltaohm/hd31/hd31_operating-manual_2479063009.webp)
HD31
- 9 -
V1.6
2.3
O
VERVIEW OF THE FUNCTIONS IN THE COMMAND BAR
F1
,
F2
and
F3
keys allow selecting the functions indicated in the display command bar. Press
the
SELECT
key to scroll cyclically through the main functions available in the command bar (or
alternatively the ESC key to scroll the functions in the opposite direction).
Some features include sub-functions (displayed in the command bar when you select the main
function by pressing the corresponding function key) or opening a menu. The scheme in Fig.
2.3.1 illustrates the functions listed using the SELECT key and the corresponding sub-functions.
Fig. 2.3.1: functions in the command bar
The commands shown in the scheme are briefly outlined below. For a detailed description,
please refer to the sections in the manual for the respective functions.
1.
LOG
(logging): logging on and off. If logging is not enabled, the following sub-functions
appear:
RUN
: manual start of the logging.
PROG
(program): setting the programmed start and stop of the logging.
SEL
(select): selects the measurement line indicated by the cursor on the display for
logging. If the measurement line has been already selected, the selection is canceled.
If logging is enabled, the following sub-functions appear instead of RUN and SEL:
STOP
: manual stop of the logging.
MANL
(manual): manual acquisition of a sample (function enabled only if the setting
of the logging interval is MANUAL).
2.
MENU
: opens the configuration menu of the instrument.
3.
USB
: activation and deactivation of the MSD (Mass Storage Device) to read the SD card
from the PC (see paragraph 14.1 at page 110).
4.
IN
(input): selection of the quantities to be displayed. The following sub-functions are
shown:
<<<
: scrolls backward the available quantities in the display line indicated by the cursor.
DIFF
: displays the difference between the quantity currently indicated by the cursor
and an equivalent quantity, if available. If there are several equivalent quantities,
press repeatedly F2 until the desired quantity is selected.
>>>
: scrolls forward the quantities available in the display line indicated by the cursor.
5.
UNIT
: selects the measurement unit. The following sub-functions are shown:
<<<
: scrolls backwards the measurement units available for the quantity shown in the
display line indicated by the cursor.
>>>
: scrolls forward the measurement unit available for the quantity shown in the dis-
play line indicated by the cursor.
6.
REL
: displays the relative measurement, that is the difference between the current value
and the one stored when the key was pressed, in the display line indicated by the cursor.
Configuration Menu
Hot-wire power supply
Connection mode
Relative measure
Print of measures
Offset correction
Reset of peak value
Содержание HD31
Страница 6: ...HD31 6 V1 6 2 DESCRIPTION Fig 2 1 instrument description...
Страница 149: ...HD31 149 V1 6 NOTES...
Страница 150: ...HD31 150 V1 6 NOTES...
Страница 151: ......