DeltaOHM HD31, Руководство по эксплуатации

Страница: 56 / 154

HD31
- 56 -
V1.6
3. Using
S
and
T
, select START to set the start time, or STOP
command to set the stop time. If a programmed time has not
been entered, the fields appear empty, otherwise the entered
time is shown. Select OK by pressing the F3 key to continue.
4. Select the different date/time fields using “ <<< ” ( F1 key) or
“ >>> ” ( F2 key) commands, the selected field flashes. Use
S
and
T
to change the value.
5. Press F3 (OK command) to confirm.
6. Press ESC to return to measuring mode. The programmed
logging symbol appears in the display status bar.
At the set start date/time, the logging of the measurement lines
explicitly selected for logging, or the logging of all the meas-
urement lines if no line was explicitly selected for logging is
started. The LOG indication, the set logging interval and the
logging duration are shown in the display status bar.
Logging will automatically stop at the set stop date/time. If you want logging to be stopped in
advance, date/time programming must be deleted and stop logging manually as explained be-
low:
1. Press SELECT to display the LOG command in the command bar, then select the command
by pressing the F1 key.
2. Select the PROG command by pressing the F2 key.
3. Select the CLR command by pressing the F1 key. A message
is displayed asking to confirm the operation, select YES ( F3
key) to continue: logging programming is deleted.
4. Press ESC to return to the previous command level.
Programmed logging