DeltaOHM HD31, Руководство по эксплуатации

Страница: 112 / 154

HD31
- 112 -
V1.6
Print of measurements (through USB):
Command Response Description
PRBINPUT:x
(x = A, B, C) List of quantities | Lists the quantities measured by the
probe connected to input x.
MONTIME: MONTIME:nn| Reads the periodic print interval of meas-
urements on PC (the value is in seconds).
MONTIME:nn
(nn = 1, 5, 10, 15, 30,
60, 120, 300, 600, 900,
1200, 1800, 3600)
MONTIME:nn; ok| Sets the periodic print interval of meas-
urements on PC to nn second value.
MONCHN:cc
(cc = 01…36) MONCHN:cc;n| Indicates whether the measurement with
sequential number cc on the display of the
instrument is selected for periodic print:
ƒ
not selected if n=0
ƒ
selected if n=1
MONCHN:cc;n
(cc = 01…36; n=0,1) MONCHN:cc;n; ok| Selects/deselects the measurement with
sequential number cc on the display of the
instrument for periodic print:
ƒ
deselects if n=0
ƒ
selects if n=1
MONITOR:n
(n = 0,1) Measured values | Enables/disables periodic print of
measurements on PC:
ƒ
disables if n=0
ƒ
enables if n=1
If quantities for periodic print have been se-
lected, only the selected quantities are
printed, otherwise all the quantities dis-
played by the instrument are printed.
CHNSHOT:cc
(cc = 01…36) Measured value | Single print on PC of the measurement
with sequential number cc on the display
of the instrument.
HOLD: HOLD:n; ok| Enables/disables the HOLD function:
ƒ
disables if n=0
ƒ
enables if n=1
REL:cc
(cc = 01…36) REL:cc;n| Indicates the activation status of the REL
function for the measurement with se-
quential number cc on the display of the
instrument:
ƒ
disabled if n=0
ƒ
enabled if n=1
REL:cc;n
(cc = 01…36; n=0,1) REL:cc;n; ok| Enables/disables the REL function for the
measurement with sequential number cc
on the display of the instrument:
ƒ
disables if n=0
ƒ
enables if n=1
PEAKCLEAR:x
(x = A, B, C) PEAKCLEAR:on; ok| Reset of the peak value detected by the
pressure probe connected to input x.