Delta AX-3 Series, Руководство по эксплуатации

Страница: 205 / 370

C h a p t e r 7 M o t i o n C o n t r o l B a s i c S e t t i n g s & O p e r a t i o n
7 - 8 7
7_
7.7.4 Torque control
Torque control can be categorized into Cyclic Synchronous Torque mode (CST) and Profile Torque mode (PT).

Profile Torque mode (PT)
-
Use DMC_TorqueControl to generate assigned torque output continuously through single axes.
-
Notification
•
When using DMC_TorqueControl, switch the control mode to cyclic synchronous torque mode.
•
When using MC_TorqueControl, the control mode switches to torque mode and cannot use function
blocks regarding shifts or velocity. Use MC_TorqueControl Enable instead of MC_Stop to stop motors.
•
Do not set Torque to 0, when setting is 0, MC_TorqueControl is reported as error.
•
Use the velocity of DMC_TorqueControl to set the maximum velocity limit for servo motors which avoids
high speed rotation as motor load declines in torque mode.
•
Adopt TorqueRamp to achieve the target torque value.
•
When Torque is bigger than 0 (Torque > 0), the motor operates in positive direction.
•
When Torque is smaller than 0 (Torque < 0), the motor operates in negative direction.