Delta Tau PMAC Pack Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 121

background image

PMAC-Pack

Overview

3

Electrostatic Sensitive Devices

Various circuit card assemblies and electronic components may be classified as Electrostatic Discharge
(ESD) sensitive devices. Equipment manufacturers recommend handling all such components in
accordance with the procedures described in Appendix A.

Failure To Do So May Void Your Warranty

.

Technical Support

Delta Tau is happy to respond to any questions or concerns you have regarding PMAC-Pack. You can
contact the Delta Tau Technical Support Staff by the following methods:

By Telephone

For immediate service, you can contact the Delta Tau Technical Support Staff by telephone Monday
through Friday. Our support line hours and telephone numbers are listed below.

By FAX and E-Mail

You can FAX or E-Mail your request or problem to us overnight and we will attempt to reply the
following business day. Our FAX numbers and E-Mail addresses are listed below. Please supply all
pertinent equipment set-up information.

Bulletin Board Service (BBS) and Web Site

You can also leave messages on one of our Bulletin Board Services (BBSs). The BBSs are provided for
our Customers, Distributors, Representatives, Integrators, et al. We invite you to use this service. You can
download & upload files and read posted bulletins and Delta Tau newsletters. Messages may be left for
anyone who is a member/user of the Bulletin Board System(s). All you need is a modem and Procomm-
Plus or similar communications program. Many Download-Upload Protocols such as Z-Modem are
supported.

Our BBS is also linked to the Delta Tau Internet site. It is possible to download BBS files via FTP and
your Internet connection, saving log-distance phone charges. For additional information, visit our web site
at

www.deltatau.com

World Headquarters Eastern

U.S.

Office European

Office

Delta Tau Data Systems, Inc.
9036 Winnetka Avenue
Northridge CA, 91324

Delta Tau Data Systems, Inc.
10754 Decoursey Pike

Ryland Heights, KY 41015

Delta Tau Data Systems
International
Industrieweg 175, Suite 7
3044 AS Rotterdam, Netherlands

Support Hot Line
Monday through Friday

8:30am to 4:30pm PST

Support Hot Line
Monday through Friday
8:30am to 4:30pm EST

Support Hot Line
Monday through Friday
8:00am to 4:00pm GMT

Voice: (818) 998-2095
FAX: (818) 998-7807
BBS: (818) 407-4859
E-Mail:

[email protected]

Voice: (606) 356-0600
FAX: (606) 356-9910

BBS: (606) 356-6662

E-Mail:

[email protected]

Voice: 31-10-462-7405
FAX: 31-10-245-0945
BBS: TBD
E-Mail:

[email protected]

BBS Settings:

Baud Rates: 1200 to 19.2

8 - data bits, 1 - stop bit, No Parity

«
...
12
13
14
15
16
...
»

Содержание PMAC Pack


























































































































Отзывы:

Нет отзывов

Похожие инструкции для PMAC Pack

Бренд: Acconeer Страницы: 32

Бренд: Jetter Страницы: 35

Бренд: Magma Страницы: 2

NetLink 2960 RAS

Бренд: Patton electronics Страницы: 2

F-ZTAT H8/3048 Series

Бренд: Renesas Страницы: 34

Бренд: NEC Страницы: 2

ER3-100 (5K02-55)

Бренд: 8e6 Technologies Страницы: 74

Бренд: National Instruments Страницы: 130

Бренд: ZKTeco Страницы: 68

Бренд: Microchip Technology Страницы: 9

640 - Pentium 4 640 3.2GHz 800MHz 2MB Socket 775 CPU

Бренд: Intel Страницы: 105

Бренд: Active Communications Страницы: 10

Бренд: Gearlinx Страницы: 23

Бренд: Supermicro Страницы: 131

ipRocketLink IAD 3086

Бренд: Patton electronics Страницы: 12

ARC-12x4 Series

Бренд: Areca Страницы: 2

Бренд: ST Страницы: 67

Бренд: Renesas Страницы: 6

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды