Delta Tau PMAC Pack Скачать руководство пользователя страница 112 | Manualshive

Страница: 112 / 121

background image

PMAC-Pack

PMACPack Options and Accessories

101

Option 8

Provides interpolation for an analog quadrature encoder, yielding 128 or 256 states per cycle. With sub-
option a, interpolation for a second encoder is provided.

Option 9

Interfaces up to four Yaskawa absolute encoders, providing absolute power-on position serially through
the thumb wheel Multiplexer port, and ongoing quadrature position information through the normal
encoder ports.

PMAC-Pack Compatible ACC8D

Options are specified as follows:

•

ACC8D-OPT-6: Encoder Optical isolation (4)

•

ACC8D-OPT-7: Resolver-to-digital converter (2)

•

OPT A: Two additional R/D converter channels

•

ACC8D-OPT-8: Analog encoder interpolator (1)

•

OPT A: One additional analog encoder interpolator

•

ACC8D-OPT-9: Yaskawa absolute encoder interface (4)

Accessory 9: IBM PC Executive Software Disks

The Accessory 9 family of software products for IBM-PC and compatible computers provide
development and diagnostic tools for building a PMAC application.

The ACC-9D PMAC Executive Program is a host program for the PMAC controller that is intended as a
development tool in starting a PMAC application. It provides a terminal emulator, PMAC program editor
with disk file functions, and special screens for viewing PMAC variables and status. The program was
written in the "C" programming language.

All ACC-9 programs are sold on a site license basis. The library and function block products may be
included in re-sold application software without royalties. If the Executive program is to be re-sold as part
of a PMAC system, one copy must be purchased for each customer to whom it is resold.

Accessory 12: Liquid Crystal/Vacuum Fluorescent Display

Accessory 12 provides display capability for the PMAC independent of the host interface. It connects to
the JDISP connector on PMAC-Pack. The user can program (through the DISPLAY command) what he
wishes to show on the display. The vacuum fluorescent (VF) display is larger and brighter than the liquid
crystal (LCD) display.

Note:

A custom interface cable (no charge) is required for PMAC-Pack. Consult Delta
Tau before ordering.

•

ACC-12: 2x24 character alphanumeric LCD display; 5mm high characters

•

ACC-12A: 2x40 character alphanumeric LCD display; 5mm high characters

•

ACC-12C: 2x40 character alphanumeric VF display; 5mm high characters

•

ACC-12D: Long-distance display signal driver module

•

ACC-12E: Adapter and power driver for ACC-12F display

•

ACC-12F Opt 1: 2x40 character alphanumeric VF display; 6mm high characters

•

ACC-12F Opt 2: 4x20 character alphanumeric VF display; 11mm high characters

Accessory-14: I/O Expansion Board

An ACC14D may be mounted externally on standoffs and connected to the PMAC-Pack through the
JEXP port. An enclosed ACC14 may be available in the future. Contact Delta Tau for further information.

«
...
110
111
112
113
114
...
»

Содержание PMAC Pack


























































































































Отзывы:

Нет отзывов

Похожие инструкции для PMAC Pack

Бренд: Paradyne Страницы: 16

Бренд: Idis Страницы: 86

Бренд: Paradyne Страницы: 2

MegaRAID SATA 300-4XLP

Бренд: LSI Страницы: 3

PISO-725 Series

Бренд: ICP DAS USA Страницы: 8

HiGain H2TU-R-402 List 7A

Бренд: ADC Страницы: 7

Бренд: Renesas Страницы: 28

Бренд: ZALMAN Страницы: 9

Бренд: Renesas Страницы: 4

Бренд: MFJ Страницы: 11

Бренд: Atmel Страницы: 2

Бренд: Dahua Страницы: 113

Бренд: Aaeon Страницы: 57

Бренд: Juniper Страницы: 196

Бренд: Icy Box Страницы: 2

Бренд: IBM Страницы: 74

Бренд: Digital Equipment Страницы: 90

Бренд: H3C Страницы: 34

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды