Installing and removing sled components
75
Figure 24. Removing the LOM riser card
1
LOM riser card
2
screw (2)
3
standoff (2)
4
connector onthesystem board
Next steps
1
Installthe LOMrisercard.
2
Followthe procedure listed inthe After working inside your systemsection.
Related links
Safety instructions
Before working inside your system
Installing the LOM riser card
After working inside your system
Installing the LOM riser card
Prerequisites
CAUTION:
Manyrepairsmayonlybedonebyacertifiedservicetechnician.Youshouldonlyperformtroubleshootingandsimple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
NOTE:
You must remove the LOM riser card to replace a faulty LOM riser card or service other components inside the system.
1
Followthesafetyguidelineslistedinthe Safetyinstructions section.
2
FollowtheprocedurelistedintheBefore workinginside yoursystemsection.
3
Keep the Phillips #2 screwdriverready.