Installing and removing sled components
101
3
screw (4)
4
system board holder
Figure 45. Removing the system board
1
system board holder
2
system board
Next steps
1
Install the systemboard.
2
Followthe procedure listed inthe After working inside your systemsection.
Related links
Safety instructions
Before working inside your system
Removing a heat sink
Removing a processor
Removing memory modules
Removing an SSD carrier
Removing the SSD backplane
Removing the SSD cage
Removing the PCIe mezzanine card
Removing the LOM riser card
Installing the system board
After working inside your system
Installing the system board
Prerequisites
CAUTION:
Manyrepairsmayonlybedonebyacertifiedservicetechnician.Youshouldonlyperformtroubleshootingandsimple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
NOTE:
This is a Field Replaceable Unit (FRU). Removal and installation procedures should beperformed only by Dell certified
service technicians.
NOTE:
You must remove the system board to replace a faulty system board.
1
Followthesafetyguidelineslistedinthe Safetyinstructions section.
2
FollowtheprocedurelistedintheBefore workinginside yoursystemsection.
3
Remove the system board.
4
Unpack the new system board assembly.
5
Keep the Phillips #2 screwdriver, the 4 mm and 5 mm Hex nut drivers ready.
