PowerEdge FC430 system overview
11
Drive-Status indicator pattern
Condition
NOTE:
Thedrivestatusindicatorremainsoffuntilalldrivesare
initializedaftersystempowerissupplied. Drivesarenotreadyfor
insertion or removal during this time.
Flashes green, amber, and then turns off
Predicted drive failure
Flashes amber four times per second
Drive failed
Flashes green slowly
Drive rebuilding
Steady green
Drive online
Flashes greenfor three seconds, amber for three
seconds, andturnsoffaftersixseconds
Rebuild aborted
iDRAC Direct LED indicator codes
The iDRAC Direct LED indicator lights up to indicate that the port is connected and is being used as a part of the iDRAC subsystem.
NOTE:
The iDRAC Direct LED indicator does not turn on when the USB port is used in the USB mode.
Figure 5. iDRAC Direct LED indicator
1
iDRAC Direct status indicator
TheiDRACDirectLEDindicatortabledescribes iDRACDirectactivitywhenconfiguringiDRAC Directbyusingthemanagementport(USB
XML Import).
Table 5. iDRAC Direct LED indicators
Convention
iDRAC Direct LED
indicator pattern
Condition
A
Green
Turns green for a minimum of two seconds to indicate the start and end of a file transfer.
B
Flashing green
Indicates file transfer or any operation tasks.
C
Green and turns off
Indicates that the file transfer is complete.
D
Not lit
Indicates that the USB is ready to be removed or that a task is complete.
