Installing and removing sled components
97
3
Remove the SSD backplane.
4
Keep the Phillips #2 screwdriverready.
Steps
1
Align the screws on the SSD backplane withthe screw holes on the SSD cage.
2
Press the SSD backplane into place until the retention screws on the SSD backplane engage withthe screwholes on the SSD cage.
3
Ensure that the backplane connector is seated firmly in the socket on the system board and tighten the two captive screws to secure
thebackplanetothe SSDcage.
Figure 41. Installing the SSD backplane
1
SSD backplane connector on system board
2
captive screw(2)
3
SSD backplane
4
screw hole on the SSD cage (2)
5
Next steps
SSD cage
1
Install the SSD carriers into their original bays.
2
Followthe procedure listed inthe After working inside your systemsection.
Related links
Safety instructions
Before working inside your system
Removing the SSD backplane
Installing an SSD carrier
After working inside your system
