60
Installing and removing sled components
Steps
1
Locate the appropriate memory module socket.
CAUTION:
Handleeach memory moduleonly bythe card edges, ensuring nottotouch themiddleofthe memory moduleor
metallic contacts.
2
Torelease the memorymodule from the socket, simultaneouslypress the ejectors on both ends of the memorymodule socket.
3
Lift and remove the memory module from the system.
Figure 13. Removing the memory module
1
memorymodule
2
memory module socket
3
memorymodulesocketejector (2)
Next steps
1
Install the memorymodule.
NOTE:
If you are removing the memory module permanently, install a memory module blank.
2
Install the coolingshroud.
3
Followthe procedure listed inthe After working inside your systemsection.
Related links
Safety instructions
Before working inside your system
Removing the cooling shroud
Installing memory modules
Installing the cooling shroud
After working inside your system
