74
Installing and removing sled components
Figure 23. Installing the SD vFlash card
1
SD vFlashslot
2
SD vFlashcard
Next steps
Follow the procedure listed in the After working inside your system section.
Related links
Safety instructions
Before working inside your system
After working inside your system
Replacing the SD vFlash card
LAN on Motherboard (LOM) riser card
The LOM riser card installed inyour system is an integrated network interface controller. You can remove andinstall the LOM riser card.
Removing the LOM riser card
Prerequisites
CAUTION:
Manyrepairsmay onlybedonebyacertifiedservicetechnician. You shouldonlyperformtroubleshooting andsimple
repairsasauthorizedinyourproductdocumentation,
orasdirectedbytheonlineortelephoneserviceandsupportteam.
Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1
Followthesafetyguidelineslistedinthe Safetyinstructions section.
2
FollowtheprocedurelistedintheBefore workinginside yoursystemsection.
3
Keep the Phillips #2 screwdriverready.
Steps
1
Remove the two screws that secure the LOM riser card to the system board.
2
Lift the card from the system board.
