Installing and removing sled components
67
NOTE:
When the Redundancy option is set to Mirror Mode in the Integrated Devices screen of the System Setup, the
informationisreplicatedfromone SDcardtoanother.
Removing an internal SD card
Prerequisites
CAUTION:
Manyrepairsmay onlybedonebyacertifiedservicetechnician. You shouldonlyperformtroubleshooting andsimple
repairsasauthorizedinyourproductdocumentation,
orasdirectedbytheonlineortelephoneserviceandsupportteam.
Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
thatareshippedwithyourproduct.
1
Followthesafetyguidelineslistedinthe Safetyinstructions section.
2
FollowtheprocedurelistedintheBefore workinginside yoursystemsection.
3
Enter System Setup and ensure that the
InternalSDCard Port
is enabled.
NOTE:
When an SD card failure occurs, on the next reboot, the system displays a message indicating the failure.
Steps
1
Locate the SD card slot on the internal dual SD module (IDSDM) card.
2
Press the card to release it from the slot and remove the card.
Figure 18. Replacing an internal SD card
1
SD card slot
2
SD card
Next steps
1
Followthe procedure listed inthe After working inside your systemsection.
2
Enter System Setup and ensure that the
InternalSDCard Port
is enabled.
3
Check if the newSD card is functioning properly. Ifthe problem persists, see theTroubleshooting an Internal SD Card section.
