Installing and removing sled components
71
Installing the IDSDM card
Prerequisites
CAUTION:
Manyrepairsmayonlybedonebyacertifiedservicetechnician.Youshouldonlyperformtroubleshootingandsimple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
NOTE:
You must remove the IDSDM card to replace a faulty IDSDM card.
Followthe safety guidelines listed inthe Safety instructions section.
Followtheprocedurelistedinthe Before workinginside yoursystem section.
Remove the SDcard.
Disconnect any connected USBdevices.
Remove the SSD cage.
Remove the IDSDM card.
Keep the Phillips #2 screwdriver ready.
CAUTION:
To prevent damage to the IDSDM card, you must hold the card only by its edges.
Steps
1
Slide the IDSDM card into the slot on the SSD cage.
2
Align the IDSDM card with the standoff on the SSD cage and the USB port slots on the front panel.
3
Secure the IDSDM card to the SSD cage with the screws.
Figure 21. Installing the IDSDM card
1
screw (2)
2
screw hole(2)
3
standoff (1)
4
SSD cage
1
2
3
4
5
6
7
