DATREND Systems vPad-A1, Руководство по эксплуатации

Страница: 99 / 108

vPad-A1 OPERATORS MANUAL
Starting at the top of the screen, the
AutoSettings
are organized by their corresponding A1
simulator modules.
• Patient Simulation (vPad-PS)
• SpO2 (vPad-O2)
• NIBP (vPad-BP)
• Tools (
none )
Each of these categories will contain the
AutoSettings
that have
previously been created for the parameter(s) in the group. For
instance, the “Patient Simulation” group can be expanded by
touching the
icon on the right.
The
AutoSettings
selector will now display the list of parameters
generated by the “Patient Simulation” module. This list can be
scrolled in the selector box by dragging the items up and down, and
it can be collapsed by touching the
icon.
Users may recognize the list of sub-categories as the parameter
names on the
Main
screen tabbed toolbar (e.g., see
Figure 17
and
Figure 18
). Touching the “ECG” sub-category, for instance, will
reveal a full list of
ECG AutoSettings
previously created.
Selecting an
AutoSetting
from the popup list will place it in the
active
AutoSequence Group
, if one exists.
Note : Only one
AutoSetting
from any given list can be included
in a single
AutoSequence Group
.
The centre section of the
Editor
menu is for displaying and editing
AutoSequence Groups
. The name of the current
AutoSequence
filename will be shown here, along with a list of the
Groups
of
concurrent
AutoSettings
contained within the
AutoSequence
.
In the example in
Figure 133
, there is only one
Group
called
“Group 1". As with the
AutoSettings
selector, the
Group
(s) can be
expanded or collapsed using the and icons on a list item.
A
Group
or
AutoSetting
entry is considered active when its name is
highlighted in yellow. Activate any entry by touching its name bar.
Figure 131
Figure 132
Figure 133
Automation and Test Records/Chapter 5
#
Page 85