DATREND Systems vPad-A1 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 108

background image

Warranty Disclaimer

Should you elect to have your instrument serviced and/or calibrated by someone other than Datrend Systems or
an Authorized Service Centre, please be advised that the original warranty covering your product becomes void
when the tamper-resistant Quality Seal is removed or broken without proper factory authorization. We strongly
recommend, therefore, that you send your instrument to Datrend Systems or an Authorized Service Centre for
service and calibration, especially during the original warranty period.

In all cases, breaking the tamper-resistant Quality Seal should be avoided at all cost, as this seal is the key to
your original instrument warranty. In the event that the seal must be broken to gain internal access to the
instrument (e.g., in the case of a customer-installed firmware upgrade), you must first contact Datrend Systems
at 1-604-291-7747. You will be required to provide us with the serial number for your instrument as well as a
valid reason for breaking the Quality Seal. You should break this seal only after you have received factory
authorization. Do not break the Quality Seal before you have contacted us! Following these steps will help
ensure that you will retain the original warranty on your instrument without interruption.

WARNING

Unauthorized user modifications or application beyond the published specifications may result in electrical
shock hazards or improper operation. Datrend Systems will not be responsible for any injuries sustained due to
unauthorized equipment modifications.

DSI DISCLAIMS ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR APPLICATION

.

THIS PRODUCT CONTAINS NO USER-SERVICEABLE COMPONENTS.
UNAUTHORIZED REMOVAL OF THE INSTRUMENT COVER SHALL VOID
THIS AND ALL OTHER EXPRESSED OR IMPLIED WARRANTIES.

Note: Calibration of Datrend products typically involves adjustment of parameters stored in firmware by proprietary
software. Parties other than Datrend and its Authorized Service Centers are limited to verification of the status of
the accuracy of the instrument. Do not confuse verification with calibration.

vPad™, vPad-A1™, vPad-ES™, vPad-353™, vPad-RF™, vPad-AS™, vPad-A3™,vPad-NFPA™, vPad-RM™,
vPad Record Manager™, vPad-AIMS™, vPad-EQM™, vPad-Check™, vPad-Cal™, vPad-STM™,
vPad-XPORT™, Datrend Docs™ and CMX

™

are trademarks of Datrend Systems Inc.

Android

™

is trademark of Google Inc.

Page iii

«
...
5
6
7
8
9
...
»

Содержание vPad-A1













































































































Отзывы:

Нет отзывов

Похожие инструкции для vPad-A1

Бренд: Gefen Страницы: 31

Бренд: ORiNG Страницы: 2

TIMEGUARD WF10COM

Бренд: Theben Страницы: 35

Edge RTM-ATCA-F140

Бренд: Penguin Страницы: 2

ToolBox GTB-MHDMI1.3-441

Бренд: Gefen Страницы: 25

Бренд: PRO SIGNAL Страницы: 4

Бренд: Scion Страницы: 8

Бренд: Orei Страницы: 27

Бренд: INDO Страницы: 3

Бренд: Santon Страницы: 16

SRW224 - 10/100 - Gigabit Switch

Бренд: Linksys Страницы: 2

Бренд: Rackmount Страницы: 17

Бренд: Edge-Core Страницы: 2

Бренд: e+p Страницы: 2

Бренд: IRT Electronics Страницы: 17

Бренд: JDS Uniphase Страницы: 113

LAN MASTER 33022.B

Бренд: Transition Networks Страницы: 12

MX-HDBASE6X6-4K

Бренд: KanexPro Страницы: 42

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды