DATREND Systems vPad-A1, Руководство по эксплуатации

Страница: 74 / 108

vPad-A1 OPERATORS MANUAL
•
Step
The test begins automatically, raising the system pressure to the
first
Pressure Step
target. Once the target has been reached, the
Result
screen shows a countdown above the
Comments
box for
the duration of the
Delay Time
.
In this
Mode
, data sets are added without the button.
They are automatically appended at the expiration of the
Delay
Time
countdown. The test then proceeds to the next
Pressure
Step
, waits for another
Delay Time
duration, and so on through
every pressure interval until pressure reaches the
Maximum
Pressure
. Result assignment (PASS/FAIL) buttons are
subsequently enabled.
At
Maximum Pressure
, vPad-A1 will actively maintain the pressure
level until user assigns a / or .
Note
: It is recommended that users exit the
Pressure Result
screen when finished to
conserve battery power.
Figure 87
Manual Operation/Chapter 4
#
Page 60