D-Link DGS-1210/ME series, Справочное руководство

Страница: 412 / 522

DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
392
50
ARP COMMANDS
The ARP commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in
the following table.
Command Parameter
config arp_aging time <value 0-65535 >
clear arptable
create arpentry <ipaddr> <macaddr>
config arpentry <ipaddr> <macaddr>
delete arpentry [<ipaddr> | all]
show arpentry
{information | interface_name {system} | ip_address <ipaddr> | mac_address
<macaddr> | summary}
show arpentry
aging_time
Each command is listed in detail, as follows:
config arp_aging time
Purpose To configure the age-out timer for ARP table entries on the Switch.
Syntax config arp_aging time <value 0-65535>
Description The config arp_aging time command sets the maximum amount of
time, in minutes, that an ARP entry can remain in the Switch’s ARP
table, without being accessed, before it is dropped from the table.
Parameters <value 0-65535> – The ARP age-out time, in minutes. The value
may be in the range of 0-65535 minutes, with a default setting of 20
minutes.
Restrictions Only Administrator or operator-level users can issue this command.
Example usage:
To configure ARP aging time:
DGS-1210-28MP/ME:5# config arp_aging time 30
Command: config arp_aging time 30
Success.
DGS-1210-28MP/ME:5#