D-Link DGS-1210/ME series, Справочное руководство

Страница: 120 / 522

DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
100
encryption of packets sent between the Switch and a remote SNMP
manager.
auth_nopriv
− Specifies that authorization is required, but there is no
encryption of packets sent between the Switch and a remote SNMP
manager.
auth_priv
− Specifies that authorization is required, and that packets
sent between the Switch and a remote SNMP manger are
encrypted.
Restrictions Only Administrator, operator and powe user-level users can issue
this command.
Example usage:
To create an SNMP host to receive SNMP messages:
DGS-1210-28MP/ME:5# create snmp host 10.90.90.22 v3 noauth_nopriv dlink
Command: create snmp host 10.90.90.22 v3 noauth_nopriv dlink
Success.
DGS-1210-28MP/ME:5#
delete snmp host
Purpose To remove a recipient of SNMP traps generated by the Switch’s
SNMP agent.
Syntax delete snmp host <ipaddr>
Description The delete snmp host command deletes a recipient of SNMP traps
generated by the Switch’s SNMP agent.
Parameters
<ipaddr>
− The IP address of a remote SNMP manager that
receives SNMP traps generated by the Switch’s SNMP agent.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To delete an SNMP host entry:
DGS-1210-28MP/ME:5# delete snmp host 10.90.90.22
Command: delete snmp host 10.90.90.22
Success.
DGS-1210-28MP/ME:5#
show snmp host
Purpose To display the recipient of SNMP traps generated by the Switch’s
SNMP agent.
Syntax show snmp host {<ipaddr>}
Description The show snmp host command is used to display the IP addresses
and configuration information of remote SNMP managers that are
DGSignated as recipients of SNMP traps generated by the Switch’s