D-Link DGS-1210/ME series, Справочное руководство

Страница: 278 / 522

DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
258
32
VLAN COMMANDS
The VLAN commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in
the following table.
Command Parameter
create vlan
create vlan [<string 32> tag <int 2-4094> {[type_1q_vlan_advertisement |
private_vlan]}] | [vlanid <vidlist> {[type_1q_vlan_advertisement | private_vlan]}]
delete vlan [<vlan_name 32> | vlanid <vidlist>]
config vlan
[<vlan_name 32> | vlanid <vidlist>] [[add [tagged | untagged | forbidden] | delete ]
[<portlist> | name <vlan_name 32>] {advertisement [enable | disable]}
config private_vlan
[vlan <vlan_name 32> | vlanid <int 1-4094>] [[add [isolated | community] |
remove ] [<vlan_name 32> | vlanid <vlanid_list>]
config private_vlan
trunk
[promiscuous | secondary] [add | remove] ports <portlist>
show private_vlan {vlan <vlan_name 32> | vlanid <vlanid_list>}
config gvrp
[state [enable | disable] | ingress_checking [enable | disable] | acceptable_frame
[Tagged_Only | All_Frames] | pvid <vlanid 1-4094>]
config pvid <int 1-4094> ports <portlist>
config gvrp timer
[join_timer <sec 100-100000> | leave_timer <sec 100-100000> | leave-all_timer
<sec 100-100000>]
enable gvrp
disable gvrp
show vlan {<vlan_name 32> | vlanid <vidlist> | ports <portlist>}
create
dot1v_protocol_group
group_id <id 1-16>
{group_name <name 32>}
config
dot1v_protocol_group [group_id <id 1-6> | group_name <name 32>] [add | delete] protocol [ethernet_2
<hex 0x0-0sffff> | ieee802.3_snap <hex 0x0-0xffff>]
delete
dot1v_protocol_group
[group_id <id 1-16> | group_name <name 32> | all]
show
dot1v_protocol_group
{group_id <id 1-16> | group_name <name 32>}
config port dot1v ports
{[<portlist> | all]} [add | delete] protocol_group [group_name <name 32> |
group_id <id 1-16>] [vlan <vlan_name 32> | vlanid <id 1-4094>]
show port dot1v {ports <portlist>}
show gvrp {<portlist>}
show gvrp timer
enable vlan_trunk