D-Link DGS-1210/ME series, Справочное руководство

Страница: 182 / 522

DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
162
Numerical Facility
Code
0 kernel messages
1 user-level messages
2 mail system
3 system daemons
4 security/authorization messages
5 messages generated internally by syslog
6 line printer subsystem
7 network news subsystem
8 UUCP subsystem
9 clock daemon
10 security/authorization messages
11 FTP daemon
12 NTP subsystem
13 log audit
14 log alert
15 clock daemon
16 local use 0 (local0)
17 local use 1 (local1)
18 local use 2 (local2)
19 local use 3 (local3)
20 local use 4 (local4)
21 local use 5 (local5)
22 local use 6 (local6)
23 local use 7 (local7)
local0
− Specifies that local use 0 messages are to be sent to the
remote host. This corresponds to number 16 from the list above.
local1
− Specifies that local use 1 messages are to be sent to the
remote host. This corresponds to number 17 from the list above.
local2
− Specifies that local use 2 messages are to be sent to the
remote host. This corresponds to number 18 from the list above.
local3
− Specifies that local use 3 messages are to be sent to the
remote host. This corresponds to number 19 from the list above.
local4
− Specifies that local use 4 messages are to be sent to the
remote host. This corresponds to number 20 from the list above.
local5
− Specifies that local use 5 messages are to be sent to the
remote host. This corresponds to number 21 from the list above.
local6
− Specifies that local use 6 messages are to be sent to the
remote host. This corresponds to number 22 from the list above.
local7
− Specifies that local use 7 messages are to be sent to the
remote host. This corresponds to number 23 from the list above.
udp_port [514 | <udp_port_number 6000-65535>]
− Specifies the
UDP port number that the syslog protocol is to use to send
messages to the remote host.
ipaddress [<ipaddr> | <ipv6addr>]
− Specifies the IPv4 or IPv6
address of the remote host to which syslog messages are to be