D-Link DGS-1210/ME series, Справочное руководство

Страница: 29 / 522

DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
9
Command Parameter
reset {[config | system | account | password {<user_name 15>}]} {force_agree}
reload config config_id <value 1-2>
logout
ping <ipaddr> {times <value 1-255> | timeout <sec 1-99> | size <short 0-2080>}
ping6
<ipv6_addr> {frequency <sec 0-86400> | size <value 1-1522> | source_ip
<ipv6_addr> | timeout <sec 1-99> | times <value 1-255>}
traceroute <ip_addr> {[max-ttl <short 1-99> | min-ttl <short 1-99>}
traceroute6 <ipv6_addr> {[max-ttl <short 1-99> | min-ttl <short 1-99>]}
show cpu port
reset cpu port
enable telnet
disable telnet
config time_range
<range_name 20> [[hours start_time <start_time 32> end_time <end_time 32>
weekdays <daylist 32> date from_day year <start_year 2009-2037> month
<start_mth 1-12> date <start_date 1-31> to_day year <end_year 2009-2037>
month <end_mth 1-12> date <end_date 1-31>] | delete]
show time_range {<range_name 20>}
show tech support
clear tech support
Each command is listed in detail, as follows:
enable password encryption
Purpose Used to enable password encryption on a user account
Syntax
enable password encryption
Description The user account configuration information will be stored in the
configuration file, and can be applied to the system at a time in the
future. If the password encryption is enabled, the password will be in
encrypted form. If password encryption is disabled and the user
specifies the password in encrypted form, or if the password has
been converted to encrypted form by the last enabled password
encryption command, the password will still be in encrypted form. It
can not revert back to plain text.
Parameters None.
Restrictions Only Administrator level users can issue this command.
Example usage:
To enable password encryption on the Switch:
DGS-1210-28MP/ME:5# enable password encryption
Command: enable password encryption