D-Link DGS-1210/ME series, Справочное руководство

Страница: 236 / 522

DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
216
Description The config scheduling_mechanism command configures the
scheduling mechanism for the QoS function. It allows the user to
select between a round robin (WRR) and a strict mechanism for
emptying the priority classes of service of the QoS function. The
Switch contains four hardware priority classes of service. Incoming
packets must be mapped to one of these four hardware priority
classes of service, or queues. This command is used to specify the
rotation by which these four hardware priority queues are emptied.
The Switch’s default is to empty the four hardware priority queues in
order − from the highest priority hardware queue (class 3) to the
lowest priority hardware queue (class 0). Each queue will transmit all
of the packets in its buffer before allowing the next lower priority
queue to transmit its packets. A lower priority hardware queue will
be pre-empted from emptying its queue if a packet is received on a
higher priority hardware queue. The packet received on the higher
priority hardware queue transmits its packet before allowing the
lower priority hardware queue to resume clearing its queue.
Parameters
strict – Specifies that the highest class of service is the first to be
processed. That is, the highest class of service should finish
emptying before the others begin.
wrr – Specifies that the priority classes of service are to empty
packets in a weighted roundrobin (WRR) order.
1st7wrr – Specifies that the highest priority queue of service to be a
strict mechanism and be the first to be processed. Others will be the
round robin (WRR) mode.
2st6wrr – Specifies that the first and second highest priority queue of
service to be strict mechanism, others will be the round robin (WRR)
mode.
Restrictions Only administrator or operator level users can issue this command.
Example usage:
To configure the traffic scheduling mechanism for each COS queue:
DGS-1210-28MP/ME:5# config scheduling_mechanism strict
Command: config scheduling_mechanism strict
Success.
DGS-1210-28MP/ME:5#
show scheduling_mechanism
Purpose To display the current traffic scheduling mechanisms in use on the
Switch.
Syntax show scheduling_mechanism
Description The show scheduling_mechanism command displays the current
traffic scheduling mechanisms in use on the Switch.
Parameters None.
Restrictions None.
Example usage:
To show the scheduling mechanism:
DGS-1210-28MP/ME:5# show scheduling_mechanism