D-Link DGS-1210/ME series, Справочное руководство

Страница: 404 / 522

DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
384
the maximum addresses allowed on the port. Re-learned
MAC addresses and address aging out are also enabled.
The MAC addresses are deleted when the device is reset
and on when the address is aged out.
Restrictions Only administrator or operator-level users can issue this command
Example usage:
To configure port security:
DGS-1210-28MP/ME:5# config port_security 1-5 admin_state enable
max_learning_addr 5 lock_address_mode DeleteOnReset
Command: config port_security 1-5 admin_state enable max_learning_addr 5
lock_address_mode DeleteOnReset
Success.
DGS-1210-28MP/ME:5#
show port_security
Purpose To display the current port security configuration.
Syntax show port_security {ports <portlist>}
Description The show port_security command displays port security
information for the Switch’s ports. The information displayed
incluDGS port security, admin state, maximum number of learning
address and lock mode and trap interval.
Parameters ports <portlist> – A port or range of ports whose settings are to be
displayed.
Restrictions None.
Example usage:
To display the port security configuration:
DGS-1210-28MP/ME:5# show port_security ports 1-5
Command: show port_security ports 1-5
Port Admin state Max.Learning Addr. Lock Address Mode
---- ------------- -------------------------- -------------------
1 enabled 5 DeleteOnReset
2 enabled 5 DeleteOnReset
3 enabled 5 DeleteOnReset
4 enabled 5 DeleteOnReset
5 enabled 5 DeleteOnReset
DGS-1210-28MP/ME:5#