D-Link DGS-1210/ME series Скачать руководство пользователя страница 188

Страница: 188 / 522

DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide

168

Success!

DGS-1210-28MP/ME:5#

config poe system

Purpose

Used to configure the Power over Ethernet (PoE) functionality.

Syntax

config

poe system [legacy_pd [enable | disable] |

power_disconnect_method [deny_low_priority_port |
deny_next_port] | power_limit <value 7-193>]

Description

The config poe system configures the Power over Ethernet (PoE)
functionality of the Switch.

Parameters

legacy_pd [enable | disable]

−

If the legacy pd is enabled, it will be

classified to non_AF PD or Legacy PD.

[deny_low_priority_port | deny_next_port] –

Defines the method

used to deny power to a port once the threshold is reached. The
possible fields are:

Deny next port: When the power budget is exceeded, the
next port attempting to power up is denied, regardless of the
port priority.

Deny low priority port: The port with the lower priority will be
shut down to allow the higher priority port to power up.

power_limit <value 7-193> - C

onfigure the system power budget 7.1

~ 193.0 watts.

Restrictions

Only Administrator or operator-level users can issue this command.

Example usage:

To configure PoE with ports 8-10:

DGS-1210-28MP/ME:5# config poe system power_limit 193

Command: config poe system power_limit 193

Success!

DGS-1210-28MP/ME:5#

show poe ports

Purpose

Used to display the ports of Power over Ethernet (PoE).

Syntax

show poe ports [all | <portlist>]

Содержание DGS-1210/ME series










































































































































































































































































































































































































































































































































Результаты поиска

Содержание DGS-1210/ME series

Отзывы:

Бренды по названию

Популярные бренды

D-Link DGS-1210/ME series, Справочное руководство

Результаты поиска

Содержание DGS-1210/ME series

Отзывы:

Бренды по названию

Популярные бренды