D-Link DGS-1210/ME series, Справочное руководство

Страница: 473 / 522

DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
453
Success.
DGS-1210-28MP/ME:5#
config admin local_enable
Purpose To configure the local_enable password for administrator level
privileges.
Syntax config admin local_enable
Description The config admin local_enable command changes the locally
enabled password for the local_enable admin command. When a
user chooses the ‘ local_enable ’ method to promote user level
privileges to administrator privileges, the user is prompted to enter
the password configured here.
After entering the config admin local_enable command, the user is
prompted to enter the old password then a new password in a string
of no more than 15 alphanumeric characters, and finally prompted to
enter the new password again for confirmation. See the example
below.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To configure the password for the ‘local_enable’ authentication method:
DGS-1210-28MP/ME:5# config admin local_enable
Command: config admin local_enable
Enter the old password:
Enter the case-sensitive new password:******
Enter the new password again for confirmation:******
Success.
DGS-1210-28MP/ME:5#
config accounting
Purpose To configure a user-defined or default method list of accounting
methods.
Syntax config accounting [default | method_list_name <string 15>]
method { | radius | server_group <string 15> | none}
Description The config accounting command is used to configure a user-
defined or default method list of accounting methods.
Parameters default - Specifies the default method list of accounting methods.
method_list_name <string 15> - Specifies the user-defined method
list of accounting methods. This name can be up to 15 characters
long.

method - Specifies the accounting method used.

- Specifies to use the built-in server group ''.

radius – Specifies to use the built-in server group 'radius'.