D-Link DGS-1210/ME series, Справочное руководство

Страница: 309 / 522

DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
289
DGS-1210-28MP/ME:5# config qinq inner_tpid 0x88a8
Command: config qinq inner_tpid 0x88a8
Success.
DGS-1210-28MP/ME:5#
create vlan_translation
Purpose To create a VLAN translation rule that will be added as a new rule or
replace a current rule.
Syntax create vlan_translation ports <portlist> [add | replace] cvid
<vidlist> svid <vlanid 1-4094> {priority <priority 0-7>}
Description The create vlan_translation cvid command is used to create a
VLAN translation rule to add to or replace the outgoing packet which
is single S-tagged (the C-VID changes to S-VID and the packet’s
TPID changes to an outer TPID).
Parameters
ports <portlist> - A range of ports to be configure.
cvid – C-VLAN ID of packets that ingress from a UNI port.
svid – The S-VLAN ID that replaces the C-VLAN ID or is inserted in
the packet.
<vlanid 1-4094> – A VLAN ID between 1 and 4094.
priority <priority 0-7> - Configure the priority of specified ports.
Restrictions Only administrator or operator-level users can issue this command.
Example usage:
To create a VLAN translation on the Switch:
DGS-1210-28MP/ME:5# create vlan_translation add cvid 2 svid 2
Command: create vlan_translation add cvid 2 svid 2
Success.
DGS-1210-28MP/ME:5#
show vlan_translation
Purpose To display the current VLAN translation rules on the Switch.
Syntax
show vlan_translation {cvid <vidlist>}
Description The show vlan_translation cvid command display the current
VLAN translation cvid on the Switch.
Parameters <vidlist>
− The Q-in-Q translation rules for the specified C-VID list.
Restrictions Only administrator or operator-level users can issue this command.
Example usage:
To display the VLAN translation cvid on the Switch:
DGS-1210-28MP/ME:5# show vlan_translation cvid 1
Command: show vlan_translation cvid 1