D-Link DGS-1210/ME series, Справочное руководство

Страница: 81 / 522

DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
61
12
PPPOE CIRCUIT ID INSERTION COMMANDS
PPPoE Circuit ID Insertion is used to produce the unique subscriber mapping capability that is possible on ATM
networks between ATM-DSL local loop and the PPPoE server. The PPPoE server will use the inserted Circuit
Identifier sub-tag of the received packet to provide AAA services (Authentication, Authorization and Accounting).
Through this method, Ethernet networks can be as the alternative of the ATM networks.
The PPPoE Circuit ID Insertion commands in the Command Line Interface (CLI) are listed (along with the
appropriate parameters) in the following table.
Command Parameter
config pppoe circuit_id
_insertion state
[enable | disable]
config pppoe
circuit_id_insertion
ports
<portlist> [ circuit_id [ mac | ip | udf <string 32> | vendor2 | vendor3 <string 32> ] |
state [enable | disable ] ]
show pppoe
circuit_id_insertion
show pppoe
circuit_id_insertion
ports
{<portlist>}
Each command is listed in detail, as follows:
config pppoe circuit_id_insertion state
Purpose Used to enable or disable the PPPoE circuit identifier insertion.
Syntax config pppoe circuit_id_insertion state [enable | disable]
Description When PPPoE circuit identifier insertion is enabled, the system will
insert the circuit ID tag to the received PPPoE discover and request
packet if the tag is absent, and remove the circuit ID tag from the
received PPPoE offer and session confirmation packet.
The inserted circuit ID contains the following information:

Client MAC address

Device ID

Port number
By default, the Switch IP address is used as the device ID to encode
the circuit ID option.
Parameters [enable | disable] – Enables or disable PPPoE circuit ID insertion
globally. The function is disabled by default.
Restrictions Only administrator or operate-level users can issue this command.
Example usage:
To globally enable PPPoE circuit identifier insertion:
DGS-1210-28MP/ME:5# config pppoe circuit_id_insertion state enable
Command: config pppoe circuit_id_insertion state enable