D-Link DGS-1210/ME series, Справочное руководство

Страница: 219 / 522

DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
199
Description The show scheduling command displays the current configuration
for the maximum number of packets ( max_packet ) value assigned to
the four priority classes of service on the Switch. The Switch empties
the four hardware queues in order, from the highest priority (class 3)
to the lowest priority (class 0).
Parameters None.
Restrictions None.
Example usage:
To display the current scheduling configuration:
DGS-1210-28MP/ME:5# show scheduling
Command: show scheduling
QOS Output Scheduling
Class ID Weight
-------- ----------
Class-0 strict
Class-1 strict
Class-2 strict
Class-3 strict
Class-4 strict
Class-5 strict
Class-6 strict
Class-7 strict
DGS-1210-28MP/ME:5#
config bandwidth_control
Purpose To configure bandwidth control on the Switch.
Syntax config bandwidth control [<portlist> | all] {rx_rate [no_limit |
<value 63-1000000>] | tx_rate [no_limit | <value 63-1000000>]}
Description The config bandwidth_control command defines bandwidth
control.
Parameters portlist - A port or range of ports to be configured.
all - Specifies that the config bandwidth_control command applies
to all ports on the Switch.
rx_rate - Enables ingress rate limiting
•
no_limit – Indicates no limit is defined .
•
<value 63–1000000> ] – Indicates a range between 63-
1000000 kbps.
tx_rate – Enables egress rate limiting.
•
no_limit – Indicates no limit is defined.
•
<value 63–1000000>] – Indicates a range between 63-
1000000 kbps .
Restrictions Only administrator-level users can issue this command.
Example usage: