Cumberland PRO-VISION, Руководство пользователя

Страница: 9 / 55

9
PRO-VISION rev.04
PRO-VISION
Copying & Pasting Programs:
Use the copy-paste function to duplicate all
parameter settings of a program onto another
program. This avoids repeating the same pro-
gramming sequence several times.
Select: 1.
Main menu
* Set-up
* * Copy/Paste
* A complete-access password may be required to
access this menu (see sec. 4.2.1).
* * Accessible if more than 1 program is enabled in
the Set-up menu (see section 4.4).
Copy/Paste
To Modify Press
Copy Program 1
Confirm No
Paste to Program 1
Set the following parameters: 2.
Copy — Select the program that must be
duplicated.
Paste to — Select the program on which the
copied program will be pasted.
Confirm — Select
“Yes”
to start the copying
process. The message
“Copy in progress”
is dis-
played. Wait until the data transfer is over.
4.3. Controller Programs &
Copy/Paste Function
Program definition: A programs is an assem-
bly of settings (temperature settings, relay
assignment, sensor assignment, etc.) that
can be enabled at different moment of the
breeding process. In all, the controller can
use 5 different programs.
Refer to the Set-up menu to enable
the desired number of programs (sec-
tion 4.4).
Make sure the right program is selected
before adjusting any parameter.
Select: 1.
Main menu
* Start Flock
* A password may be required to access this menu
(see section 4.2.1).
Start flock
To modify use -
Mortality
Loss (%)
Stat Flock
Age
Clean Mode
Remaining
Birds placed
Age
Program
New Mortality
Alarm low T°
0
0.00
No
10000
On
10000
10000
Program 1
0
No
Set the following parameters: 2.
Program — Activate the desired controller
program. * Only the programs that are enabled in
the Set-up menu can be used (see section. 4.4).
4.4. Set-up Menu
The following section shows how to custom-
ize the controller for your particular applica-
tion. It shows how to enable and set the
inputs & outputs of your controller. Normally,
this setup needs to be done only once.
Hint: Use the right and left arrow keys
to scroll the display by pages (right =
page-down, left = page-up).
Select: 1.
Main menu
* Set-up
* A complete-access password may be required to
access this menu (see sec. 4.2.1).
Relay
Assign
Current
sensors
Sensor
Calib
Update
Diagn
ostic
Time &
Date
Version
Pass
word
Test
mode
Copy/
Paste
To modify use -
Set-up
Contrast
Key beeper tone
Language
Controller used for
Time mode
Temperature Unit
Use static pressure sensor?
Pressure Unit
Use relative humidity sensor?
Use RH min vent. compensation?
Use outside T° sensor?
Use critical alarm?
Number of programs
... 100 %
100 %
English
Breeder
AM/PM
°F
Yes
"WC
No
No
No
Yes
3
...
Set the following parameters: 2.
Contrast — Adjust the contrast of the LCD
screen.
Key beeper tone — Adjust the volume of the
keypad beeper.
Language — Select the desired language
(English or Spanish).
Hint! Press and hold the main menu
button for 5 seconds to switch from a
language to the other.
Controller used for — The conroller can
either be used in a breeder, broiler or turkey
production facility. The breeder facility gives
you access to additional parameters to moni-
tor an egg room and the turkey option gives
you access to the natural ventilation mode
(natural curtain).