Cumberland EDGE 890-00601, Инструкция по установке и эксплуатации

Страница: 93 / 258

Chapter 10: House/barn setup
When you choose a fixed temperature brooder, you must first enter a start temperature. You can then
enter a stop temperature consisting of the number of degrees above the start temperature at which you
want the brooder to stop.
For example, if you want the brooder to start at 78 degrees Fahrenheit, you would enter 78.0 as the start
temperature. If you want the brooder to stop at 79 degrees Fahrenheit, you would enter +1 as the stop
temperature.
When you choose fixed offset on set point, which means that the brooder settings are related to house/
barn set point, you must enter a negative offset to get your start temperature. The stop temperature is still
an offset of the start temperature.
For example, if you want the brooder to start at 78 degrees Fahrenheit, and the set point is 80, you would
enter -2 as a start temperature. If you want the brooder to stop at 79 degrees Fahrenheit, you would enter
+1 as the stop temperature.
Dual capacity brooders
There are two ways to setup control temperatures on dual capacity brooders you can use a fixed temper-
ature or fixed offsets.
When you choose fixed temperature, which means that the brooder settings are independent from house/
barn set point, you must start by entering the temperature at which you would like the brooder to start on
low fire (
Start low ). You must also enter a Hot start time , which is a time in minutes indicating how long
the brooder must start on high fire to preheat. Hot start time is mostly used for radiant tube brooders.
Once those two values are entered, you can enter a negative offset of the Start low temperature to get
your Start high temperature, and a positive offset on the Start low temperature to get your Stop
temperature .
When you choose fixed offsets, which means that the brooder settings are related to house/barn set
point, you must enter a negative offset on the
House/barn temperature set point to get your Start low
temperature. You must enter your Hot start time , and then a negative offset on the Start low temperature
to get a Start high temperature. You must also enter a positive offset on the Start low temperature to get
the Stop temperature .
Variable capacity brooders
There are two ways to setup control temperatures on variable capacity brooders. You can use a fixed tem-
perature or fixed offsets.
When you choose a fixed temperature brooder, which means that the brooder settings are independent of
house/barn set point, you must first enter a start temperature . You can then enter a stop temperature
consisting of the number of degrees above the start temperature at which you want the brooder to stop.
When you choose fixed offset on set point, which means that the brooder settings are related to house/
barn set point, you must enter a negative offset to give you a start temperature. The stop temperature is
still an offset of the start temperature.
There are, however, advanced settings for variable brooders that are as follows:
NOTE: You must have administrative level user access for these settings to be accessible
• Throttle range
• KP
• KI
• TI
895-00693 EDGE 93