Comtech EF Data CRS-500, Инструкция по установке и эксплуатации

Страница: 198 / 220

CRS-500 1:N Redundancy System
Revision 4
Appendix B B–2 MN-CRS-500
B.2.1 Coaxial Cable Connections
(TOP) Bayonet Coupling Plug and Jack (Type ‘BNC’ Shown)
(BOTTOM) Threaded Coupling Plug and Jack (Type ‘N’ Shown)
Figure B-1. Coaxial Connector Examples
The types of coaxial cables used by Comtech EF Data are ‘BNC’, ‘TNC’, ‘N’, ‘F’, and ‘SMA’.
Coaxial cables (plugs) and their mating connectors (jacks/sockets) are available in two coupling
styles – Bayonet or Threaded:
Bayonet Coupling Style – The jack has a pair of guideposts that accommodate the plug’s
lockdown slots. This lockdown design provides secure assembly without over-tightening the
connection.
Threaded Coupling Style – The jack features external threads. The plug shell features internal
threads, and has either a knurled outer surface to permit hand-tightening of the connection, or
hex flats to accommodate torqued installation.
Connection Instructions:
Bayonet Coupling Connections – Use the plug slots to guide, and then slide the plug onto the
jack posts. Then, turn the plug clockwise until the jack posts are fully seated within the plug slot.
Threaded Coupling Connections – Engage the plug onto the jack threads, and then turn the
plug clockwise until it is fully threaded onto the jack. Do not over-tighten the connection.