Comtech EF Data CRS-500, Инструкция по установке и эксплуатации

Страница: 111 / 220

CRS-500 1:N Redundancy System
Revision 4
Firmware Update 6–15 MN-CRS-500
5. Reboot the system. Open the ‘ Utility | Boot Slot’ page, and click [Reboot Now] to
power cycle the system:
A 5-second countdown window appears before the system reboots:
During this time you may click [click to cancel] to abort the process. Should you allow
reboot to proceed, the following messages appear during the reboot process:
6. If needed, update the alternate firmware image. Should you desire to update the
originally-selected image slot – i.e., the slot that was in use at the time the file upgrade
was applied to the slot not in use – then do these steps:
a. As per Step 4 , open the ‘ Utility | Boot Slot ’ page and use the ‘ Boot From: ’
drop-down list to select the newly-upgraded image as the designated image from
which to boot, and then click [Update] .
b. Reboot the system as per Step 5 . Once the reboot is complete, click [click to
continue] to return to the ‘ Utility | Boot Slot’ page.
c. With the newly-upgraded image now selected and active, repeat Steps 1
through 5 to automatically upload the firmware file upgrade to the alternate
image slot .